Mazda 3 2019 Owner's Manual page 307

Also, before using the system, always
make sure that the vehicle can be
parked/stopped in the parking/stopping
space.
NOTE
If there are water droplets, snow, or mud

on the camera lens, wipe it off using a
soft cloth. If the camera lens is
especially dirty, wash it off with mild
detergent.
If the camera lens is touched or there is

any dirt on it, it could affect the screen
image. Wipe the lens using a soft cloth.
If the area where the camera is

installed, such as the front/rear bumper
or door mirrors, has been damaged in a
vehicle accident, the camera (position,
installation angle) may have shifted.
Always consult an Authorized Mazda
Dealer to have the vehicle inspected.
If the camera is subjected to excessive

changes in temperature such as by
pouring hot water on the camera during
cold weather, the 360°View Monitor may
not operate normally.
If the battery voltage is low, the screen

might be temporarily difficult to view,
however, this does not indicate a
problem.
The 360°View Monitor has limitations.

Objects under the bumper or near both
ends of the bumper cannot be displayed.
Obstructions above the upper image

range of the camera are not displayed.
Under the following conditions, the

screen might be difficult to view,
however this does not indicate a
problem.
i-ACTIVSENSE
The temperature near the lens is high/

low.
Rainy conditions, water droplets on

the camera, or high humidity.
Mud or foreign matter near the

camera.
Extremely bright light such as sunlight

or headlights hitting the camera lens
directly.
The surroundings are illuminated by

vehicle lights, fluorescent lights, or
LED lights (Display may flicker).
Extremely small dark or white dots

appear on the screen (dots may
flicker).
Because the 360°View Monitor camera

uses a special lens, the distance
displayed on the screen differs from the
actual distance.
Obstructions displayed on the screen

may appear differently than in actuality.
(Obstructions may appear fallen, larger,
or longer than they actually are.)
Do not apply stickers to a camera or the

area around it. In addition, do not
install accessories or an illuminated
number/character license plate to the
area around a camera. Otherwise, the
camera may not correctly display the
surrounding conditions.
Free/open source software information

This product includes free/open sources.
Information about the licensing and
source code is available at the following
URL.
https://www.denso.com/global/en/
opensource/svss/mazda/
When Driving
4-167