Mazda 3 2019 Owner's Manual page 117

Hide thumbs Also See for 3 2019:
Table of Contents

Advertisement

CAUTION
Always use only a genuine Mazda
fuel-filler cap or an approved equivalent,
available at an Authorized Mazda
Dealer. The wrong cap can result in a
serious malfunction of the fuel and
emission control systems.
It may also cause the check engine light
in the instrument cluster to illuminate.
When using an automatic car wash or a
high water pressure car wash, lock the
driver's door. Otherwise, the fuel lid may
open unexpectedly and could be
damaged.
▼ Refueling
Before refueling, close all the doors,
windows, and liftgate/trunk lid, and switch
the ignition OFF.
1. Unlock the driver's door.
NOTE
When unlocking the driver's door,
the fuel lid is also unlocked at the
same time.
When locking the driver's door, the
fuel lid is locked after 90 seconds.
The time until the fuel lid is locked
after locking the driver's door can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
However, when the driver's door is
locked using the following functions,
the fuel lid is also locked at the same
time.
Auto lock/unlock function (page
3-16)
Auto re-lock function (page 3-5,
3-13)
Fuel and Emission
2. Press the location shown in the
illustration and open the fuel lid.
3. To remove the fuel-filler cap, turn it
counterclockwise.
4. Attach the removed cap to the inner
side of the fuel-filler lid.
4–door
1. Fuel-filler lid
2. Fuel-filler cap
5–door
1. Fuel-filler lid
2. Fuel-filler cap
Before Driving
3-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents