YASKAWA Solectria PVI 25TL-480-R Installation And Operation Manual page 70

Installation and Operation Guide SOLECTRIA PVI 25TL-480-R
Table 5-7 Enable / Disable Parameters with Lower Limit, Default and Upper Limit Settings (IEEE 1547-2018 and Rule 21)
Parameter name
CtrParaGroup
ReactivePwModeSelect
ActivePwModeSelect
DOCR-071030-A (11/17/2020)
Description
The enabled control parameters
group.
0:Article 5 groups, control
parameter setting of inverter loop
1:Article 1 groups, control
parameter setting of inverter loop
2:Article 2 groups, control
parameter setting of inverter loop
3:Article 3 groups, control
parameter setting of inverter loop
4:Article 4 groups, control
parameter setting of inverter loop
The control mode of reactive power
0: Disable dispatch mode.
1: Remote dispatch mode.
2: Local control ,by Q
3: Local control ,by PF
4: PF(P)curve
5: Q(U) curve
(Association register address=
0x2200. 0x250F.0x2707. 0x2709)
6:Q(P)Curve
The control mode of active power
0: Disable dispatch mode.
1: Remote dispatch mode.
Setup range Setup range
(lower limit, (lower limit,
default & upper default & upper
limit) IEEE1547 limit) Rule-21
{0, 4, 4} {0, 4, 4}
{Disable, Disable, {Disable, Q(u),
Remote， Remote，
Q,PF,PF(P),Q(u), Q,PF,PF(P),Q(u) ,
Q(P)} Q(P)}
{Disable, Disable, {Disable, Disable,
Remote,Local} Remote,Local}
Page 70 of 101