68 12 volt vehicle battery and fuses ›
Charging
The 12-volt vehicle battery is automatically charged
when the high-voltage battery is charged.
If required, the 12 volt vehicle battery can be charg-
ed using a 12 volt charger.
Requirements for charging a 12 volt vehicle bat-
tery
✓ Ignition off.
✓ Power consumers switched off.
12 volt vehicle battery charging
To charge the 12 volt vehicle battery fully, set a
charging current of max. of 0.1 times the battery ca-
pacity.
Earth point
›
After charging, switch off the charger and unplug
the power cable from the socket.
›
Disconnect the charger terminals from the 12 volt
vehicle battery.
WARNING
Risk of explosion!
During charging, hydrogen is released. An explo-
▶
sion can also be caused by sparks, for example,
when disconnecting or loosening the cable con-
nector.
Never charge a frozen or thawed 12 volt vehicle
▶
battery.
Do not carry out the so-called quick charging of
▶
the 12 volt vehicle battery yourself, but have it car-
ried out by a specialist garage.
NOTICE
A flat 12 volt vehicle battery can freeze easily!
12 volt vehicle battery
›
Tap on the indicator
before testing, to clear
air bubbles.
Black colour - the acid
▶
level is OK.
Colourless or pale yel-
▶
low colour - acid level
is too low, the 12 volt
vehicle battery must
be replaced.
›
Connect the
termi-
nal of the charger to
the
terminal of the
12 volt vehicle battery.
›
Connect the
termi-
nal of the charger to
the earth point
.
A
›
Plug the charger's
power cable into the
socket and switch on
the device.
Troubleshooting
Fault in charging of the 12 volt vehicle battery
illuminates
›
Stop driving!
›
Stop the engine and seek the help of a specialist
garage.
12 volt vehicle battery fault
A message in the display of the instrument cluster
indicating a fault on the 12 volt vehicle battery or on
secondary systems.
›
Seek the help of a specialist garage.
The state of charge of the 12 volt vehicle battery is
insufficient
A message in the display of the instrument cluster
regarding low charge or discharged 12 volt vehicle
battery.
›
Charge the vehicle using a charger.
Or:
›
Charge the 12 volt vehicle battery with a charger.
Disconnecting, connecting and replacing
CAUTION
Risk of fire!
Do not mix up the connection cables.
▶
Disconnecting
›
Close all electrically operated windows.
›
Switch off the ignition and any connected power
consumers.
›
Disconnect the
terminal and then the
nal.
Connecting
›
Connect the
terminal and then the
After switching on the ignition, the indicator lights
light up
from the isolation box.
›
If, after a short distance, one of the above-men-
tioned indicator lights does not go out, seek the
help of a specialist garage.
Operate these vehicle functions after disconnect-
ing and connecting the 12 volt vehicle battery
Clock setting
» page
40.
▶
Changing
The new 12 volt vehicle battery must have the same
parameters as the original battery. Have the replace-
ment carried out by a specialist garage.
termi-
terminal.