Skoda CITIGO IV Owner's Manual page 36

34 Lighting, windscreen wipers and washers ›
Front turn signal
The headlight on the left
lugs on the socket are aligned with the corre-
sponding openings in the light.
›
Turn the socket clockwise
Fog lights
To reach the light bulb, the wheel housing shell must
be loosened.
Loosen the wheel housing shell
Replace light bulbs
Socket for flashing
A
light
›
Turn and remove the
socket with the bulb.
›
Turn the defective bulb
in the socket and re-
move it.
›
Insert a new light bulb
into the socket and se-
cure the light bulb by
turning it in the direc-
tion of .
›
Insert the socket with
the new bulb into the
light so that the guide
to secure.
›
Unscrew the screws
.
A
›
Using, for example, a coin, rotate the centre area
(with groove) of the plastic rivet a quarter turn in
the direction .
›
Pull off the twisted part of the rivet downwards.
Replacing the light bulb
›
Remove the entire riv-
et in downwards direc-
tion.
›
Fold down the wheel
arch shell.
›
Press the safety button
and remove the plug
from the bulb.
›
Turn the bulb and re-
move it.
›
Insert the new bulb in-
to the light so that the
guide lugs on the bulb
are aligned with the
corresponding open-
ings in the light.
›
Turn the bulb clock-
wise to secure.