Navman Qube3 Installation Training & Troubleshooting page 31

Ignition Test
•
The system verifies the ignition
status by having the technician
change the key status (On/Off)
•
Follow the instructions on the
screen to complete each test as
required
– Important: Navman Wireless requires
the ignition (Pink) wire to be
connected to a true ignition source.
The source wire must have power in
the "ON/Crank/RUN" key positions. Do
not use accessory power sources
because they will cause false idle and
ignition events.
Technician Service Portal (TSP)