Conex Sensor Monitoring - Navman Qube3 Installation Training & Troubleshooting

ConEx Sensor Monitoring

Qube3 Optional 6-pin Harness:
Yellow – Multi IN-1
Green – Digital I/O-2
Blue – Digital IN-3
Purple – Digital IN-4
Black - GND Out Reference
White - +3V Out Reference
•
Qubes are capable of monitoring multiple vehicle sensors/switches thru ConEx multi function inputs.
PTO's, oil pressure, air-restriction, door pins, etc can be connected to and monitored. Sensor settings are
configured thru OnlineAVL2 software. Reverse polarity and positive trigger signals are connected to
directly. Negative trigger sensors will require a relay to convert to a positive trigger. See following pages
for different sensor configurations.
18 | Confidential