Operation - Audiovox AMP-591A Owner's Manual

OPERATION

After initial set-up, the amplifier should not require any
further adjustment unless there is a change in the car
stereo or speaker system with which it is used.
1
Power Indicator LED
The Power Indicator LED will light to indicate that
the unit is connected to the battery and that the Remote
Turn-On terminal is receiving +12 volts, thus turning
on the amplifier.
3 4
HI-INPUT LOW INPUT
BASS BOOST X-OVER
R
L
GAIN
HPF
7 6
8
POWER
FUSE
GND REM BATT
20A
2
Protection Mode LED
This LED illuminates red to indicate that the self-protection
circuits have been activated and have shut off operation
of the amplifier. The protection circuits may be triggered
by the temperature of the unit rising above a safe level
or by an overload condition. If activated by a rise in
temperature, the unit will resume operation after cooling
off to a normal operating range. If activated by an
-10-
2
1
PROT PWR
LPF
5
SPEAKER OUT
LEFT RIGHT RIGHT
LEFT
BRIDGED