Table of Contents
Advertisement
RESET
PILOT
LOCK
EXIT
52
With the
/ buttons you can now select a character. By briefly
pressing a button, the display jumps either forwards or
backwards to the next character. If you hold down a button, the
display starts cycling continuously.
Press the
SET
button to change to the next segment and select
the next character.
Have you entered the name completely? Press the
store your setting and to return to the top menu level.
Loading the factory-preset default settings
Via the "RESET" menu, you can load the factory-preset default
settings. Only the selected setting for the pilot tone remains
unchanged. After the reset, the transmitter is restarted and the
standard display is shown on the display panel.
Activating/deactivating the pilot tone transmission
(PILOT)
Via the "PILOT" menu, you can activate or deactivate the pilot tone
transmisssion.
Note:
When using the transmitter with the tourguide system, the pilot
tone transmission must be switched off.
Activating/deactivating the lock mode
Via the "LOCK" menu, you can activate or deactivate the lock mode.
The lock mode prevents that the transmitter is accidentally
programmed or switched off during operation. The lock mode
icon
on the display indicates that the lock mode is activated.
To deactivate the lock mode, first press the
press the
/
buttons to select "LOC.OFF". If you confirm your
selection by pressing the
as usual.
Exiting the operating menu
Via the "EXIT" menu, you can exit the operating menu and return to
the standard display.
SET
SET
button, the buttons can be operated
SET
button to
button and then
Advertisement
Table of Contents
