Table of Contents
Advertisement
10
3-2-3. Instructions for wall mounting
Figure 7. Wall mounting
Refer to 3-2-1 for bracket mounting. Fasten the assembled BA11 together with the bracket on
the wall using the set of two 8x50 anchors and 6.3x50 screws delivered with /UM mounting set.
Note: The wall on which BA11 is mounted should be strong enough to bear the weight of
more than 8 kg (17.64 pound).
3-2-4. Instructions for mounting at backside of FLXA402 analyzer
Figure 8. Application mounting
Refer to 3-2-1 for bracket mounting. Fasten the assembled BA11 together with the bracket
on the FLXA402 transmitter (refer to IM document of the exact model of FLXA402 transmitter for
the proper torques at M8 screws).
IM 12B06W03-01E-E
14.5
3.15
2
Dimension in
mm [inches]
11
11
2
Dimension in
mm [inches]
2
Advertisement
Table of Contents
