Siemens SIPROCESS GA700 Quick Start Manual page 45

Procedure
①
Figure 5-1
1. Connect the wires of the connecting cable to the appliance plug
supply and PE conductor connections are correct!
If you are using the power plug that is available as an option, tighten the screws in the
appliance plug with the following torques:
– 0.5 Nm at the terminals
– 0.3 Nm at the cable terminals (strain relief) and the connector enclosure
2. Connect the appliance plug
Quick Start
Compact Operating Instructions, 05/2015, A5E31805656-03
Power supply
Connecting the power supply
②
Appliance plug
②
to the power supply
5.1 Electrical connections
②
. Ensure that the power
①
.
Connecting
45