Table of Contents
Advertisement
Extended Menu
• Available only when Quick Startup is set to Off.
• When set to Always On, you can move the lens position to the home
a
position even if the projector is in standby mode.
• When set to Always On, communication from the HDBaseT port is
enabled.
Standby Mode
Extended > Standby Mode
s
Set to Communication On to monitor and control the projector over a
network.
Setting is only displayed when A/V Output is set to While Projecting.
a
HDBaseT
Extended > HDBaseT
s
You can select the communication settings for connections to an HDBaseT
transmitter or switcher.
Control Communications
You can enable or disable communication from the Ethernet and serial
ports on the HDBaseT transmitter or switcher; set to On to disable the
projector's LAN, RS-232C, and Remote ports.
Extron XTP
Set to On when you connect an Extron XTP transmitter or switcher to the
HDBaseT ports. See the following Extron Web site for more details on the
XTP system.
http://www.extron.com/
• Control Communications is only displayed when Extron XTP is set
to Off.
a
• When Extron XTP is set to On, the cooling fans may run even in
standby status. This is not a malfunction.
Color Calibration
Extended > Color Calibration
s
The color calibration process adjusts the color balance and brightness that has
deteriorated over time based on images taken by the optional external camera,
and restores the default image quality.
Color Calibration
Set to On to enable the color calibration process.
Start Auto Adjustment
Starts auto adjustment.
Undo
You can undo auto adjustment.
Redo
Select after selecting Undo to restore the image to the status after auto
adjustment.
Color Uniformity
You can adjust the color tone balance for the whole image.
Reset
You can reset all adjustment values on the Color Calibration menu to
their default settings.
g g Related Links
• "Conditions for Color Calibration"
Conditions for Color Calibration
You can use the color calibration feature under the following conditions:
• The optional external camera is installed on each projector.
p.95
95
Advertisement
Table of Contents
