Table of Contents
Advertisement
Using Basic Projector Features
Password Protection
Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
settings.
You can set up the following types of password security using one shared
password:
• Power On Protection prevents anyone from using the projector without
first entering a password. When plugging the power cord and turning on
the projector at first time, you must enter the correct password. This also
applies to Direct Power On and Auto Power On.
• User's Logo Protection prevents anyone from changing the custom screen
displayed when the projector turns on, when no signal is being input, or
when you use the A/V Mute feature. The custom screen discourages theft by
identifying the projector's owner.
• Network Protection prevents anyone from changing the projector's
Network settings.
• Schedule Protection prevents anyone from changing the projector's
schedule settings.
• Remote Camera Access prevents anyone from using the Remote Camera
Access function.
Execution Method
Hold the [Freeze] button on the remote control for approximately 5 seconds.
You can set a four-digit password. Hold down the [Num] button on
the remote control and use the numeric buttons to set a password. The
default password is set to "0000".
a
Attention
• If an incorrect password is entered three times in succession, the message "The
projector's operation will be locked." is displayed for approximately 5 minutes,
and the projector switches to standby mode. If this happens, disconnect the
power plug from the electrical outlet, reinsert it, and turn the projector back on.
The projector displays the password entry screen again so that you can enter the
correct password.
• If you have forgotten the password, make a note of the "Request Code: xxxxx"
number that appears on the screen and contact Epson for help.
• If you continue to repeat the above operation and input the wrong password 30
times in succession, the message "The projector's operation will be locked.
Contact Epson as described in your documentation." is displayed and the
projector does not accept any more password entries. Contact Epson for help.
64
Advertisement
Table of Contents
