Table of Contents
Advertisement
Accessing a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
a
Make sure the projector is turned on.
b
Make sure your computer or device is connected to the same network
as the projector.
c
Start your Web browser on the computer or device.
d
Go to the Epson Web Control screen by entering the projector's IP
address into the browser's address box. When entering an IPv6 address,
wrap the address with [ and ].
You see the Epson Web Control screen.
• In normal mode
Controls the projector remotely.
A
Operates the projector's menu settings with your finger or mouse.
B
Displays a test pattern.
C
Displays the projector's status.
D
Opens the Crestron Connected operation window. Available only when
E
you set the Crestron Connected system.
Opens detailed projector settings.
F
Takes an image capture of the displayed image from a remote location.
G
Operates the projector's lens.
H
• In Content Playback mode
Controls the projector remotely.
A
Selects the playlist you want to play, and allows you to create or edit
B
playlists.
Opens the Time Table screen.
C
Operates the projector's menu settings with your finger or mouse.
D
Displays a test pattern.
E
Displays the projector's status.
F
Opens detailed projector settings.
G
Opens the Crestron Connected operation window. Available only when
H
you set the Crestron Connected system.
Operates the projector's lens.
I
128
Advertisement
Table of Contents
