Projector Indicator Status - Epson EB-PU2010B User Manual

Projector Indicator Status

The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
a
• When the Indicators setting is set to Off in the projector's Extended
menu, all indicators are off under normal projection conditions.
s Extended > Operation > Advanced > Indicators
Power indicator
A
Status indicator
B
Laser indicator
C
Temp (temperature) indicator
D
Filter indicator
E
Projector status
Indicator and status Problem and solutions
Power: Lit blue Normal operation.
Status: Lit blue
Laser: Indicator status
varies
Temp: Off
Filter: Off
Power: Lit blue Warming up.
Status: Flashing blue When warming up, wait about 30 seconds for an image
to appear.
Laser: Indicator status
varies All buttons are disabled during warm-up.
Temp: Off
Filter: Off
Power: Lit blue Shutting down or cooling down.
Status: Flashing blue All buttons are disabled during shutting down and
cooling down.
Laser: Off
Temp: Off
Filter: Off
Power: Lit blue Standby, sleep mode, or monitoring.
Status: Off When you press the power button, projection starts.
Laser: Off
Temp: Off
Filter: Off
Power: Flashing blue Preparing for monitoring or quick startup mode. All
features are disabled.
Status: Off
Laser: Off
Temp: Off
Filter: Off
150