Installation; Installing The Front Fan - Dometic CPV Installation And Operation Manual

CCF-T Refrigerator
w q
6 Drilling the Front Fan Opening
3.5 in. (89 mm)
q
Hole Saw Drill Bit
3. Use the 3.5 in. (89 mm) hole saw drill bit to drill an
opening for the front fan.
4. Remove the template and any debris from the
console and console bin area.

7 Installation

NOTICE: Avoid lifting the weight of the refrigerator unit
by the plastic edges. Otherwise damage to the edges
could occur.
NOTICE: Do not leave the refrigerator unit in an
inverted position or run the compressor soon after
having the refrigerator in an inverted position. Otherwise
damage to the compressor could occur.
NOTICE: Avoid pinching, crushing, or breaking
the wires or power cord. Otherwise damage to the
refrigerator unit could occur.
This section describes how to install and wire the fan
and the refrigerator unit, and how to install the foam
protection material.
EN
3.5 in. (89 mm) Hole
w

7 .1 Installing the Front Fan

7 Installing the Front Fan
Front Fan
q
1. Hold the front fan vertically by the housing.
2. Insert the front fan into the new 3.5 in. (89 mm)
opening inside the console bin until it snaps into
place.
3. Tape the black fan wire to the top right lip of the
console bin to hold it in place and to protect it from
damage.
Installation
w w
q
Black Fan Wire
w
9