Installing The Foam Spacers; Installing The Refrigerator Unit - Dometic CPV Installation And Operation Manual

Installation

7 .2 Installing the Foam Spacers

8 Placing the Foam Spacers
Foam Spacer
q
1. Peel off the tape covering from the right-hand foam
spacer.
2. Affix the right-hand foam spacer to the inside of the
right-hand console bin wall:
a. Hold the foam spacer inside the console bin with
the 45 degree angled corner to the rear of the
console bin.
b. Rest the foam spacer on the console bin ledge.
c. Press the 45 degree angled corner of the foam
spacer into the rear corner.
d. Press the entire foam spacer into place.
3. Repeat steps 1 and 2 to apply the left-hand foam
spacer to the left-hand console bin wall.
10
q
w
Console Bin Ledge
w

7 .3 Installing the Refrigerator Unit

q
w w
9 Engaging the Receptacle Locks
12 VDC Power Plug
q
1. Set the refrigerator unit upright near the console bin
and insert the 12 VDC plug into the power supply.
e e
r r
10 Lowering the Refrigerator Unit into the Console Bin
Refrigerator Unit
q
Left Foam Spacer
w
2. Note the power retaining latch located at the bottom-
left corner of the refrigerator unit.
3. Gently rock the refrigerator unit from left to right while
lowering the refrigerator unit into the console bin.
CCF-T Refrigerator
Power Supply
w
q
w
Console Bin Frame Lip
e
Power Retaining Latch
r
EN