Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Greenlee RK06AT
Summary of Contents for Greenlee RK06AT
- Page 1 INSTRUCTION MANUAL RK06AT Hydraulic Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 99930900 © 2019 Greenlee Tools, Inc. IM 1369 REV 5 10/19...
-
Page 2: Table Of Contents
The RK06AT Hydraulic Crimping Tool is a dieless crimping tool intended to crimp aluminum and copper connectors onto electrical cable. This crimping tool is to be coupled to any Greenlee or Greenlee hydraulic pump capable of developing 700 bar (10,000 psi). Suggested pumps include:... -
Page 3: Important Safety Information
RK06AT Hydraulic Crimping Tool IMPORTANT SAFETY INFORMATION SAFETY ALERT Electric shock hazard: This tool is not insulated. When using SYMBOL this unit on or near energized electri- cal lines, use proper personal protec- tive equipment. This symbol is used to call your attention to hazards... - Page 4 Failure to observe these warnings could result in severe injury or death. Use only Greenlee supplied hoses and couplers. Other manufacturers’ components may fail. Failure to observe this warning could result in severe injury or death.
-
Page 5: Identification
RK06AT Hydraulic Crimping Tool Identification RK06AT 1. Crimping Head 2. Coupler 3. Decal 4. Decal Specifications Crimping Tool Length ....................254 mm (10") Width ......................127 mm (5") Height ....................66.5 mm (2.62") Mass/Weight ...................2.8 kg (6 lb 1 oz) Crimping Capacities Crimping Range ............Copper — 4 AWG to 500 kcmil Crimping Force ................ -
Page 6: Operation
RK06AT Hydraulic Crimping Tool Operation Electric shock hazard: Keep hands away from the crimping tool head when crimping. This tool is not insulated. When using this unit on or near energized electri- Failure to observe this warning could cal lines, use proper personal protec- result in severe injury or death. -
Page 7: Periodic Pressure Relief Valve Check
RK06AT Hydraulic Crimping Tool Connector Selection Tool Range: Copper — 4 AWG to 500 kcmil (except as noted ∆ This tool is cUL and UL classified for use with the following connector brands: CONNECTOR BARREL PENN- NO. OF ANDERSON BLACKBURN... -
Page 8: Illustrations
RK06AT Hydraulic Crimping Tool Illustration Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 9 RK06AT Hydraulic Crimping Tool Illustration Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 10: Parts List
RK06AT Hydraulic Crimping Tool Parts List Part No. Description 50017314 Head cover (LH) ..................1 50017322 Head cover (RH) ..................1 50017292 Cam yoke assembly .................. 1 Roller bearings ..................12 Bearing retainers ..................2 50060910 Compression spring .................. 2 50061003 Socket head cap screw, ø1/4-20 x 1 Nylock ..........