Related Manuals for I-Tech Power Q-6000 Plus
Summary of Contents for I-Tech Power Q-6000 Plus
- Page 1 USER MANUAL MNPG80 Rev. 1 Edition 06/05/2016 Compressive Limbs Therapy model Power Q-6000 Plus...
- Page 2 I.A.C.E.R. Srl Via S. Pertini 24/A – 30030 Martellago (VE) ITALY Tel. 041.5401356 • Fax 041.5402684 e-mail: iacer@iacer.it http://www.iacer.ve.it...
-
Page 3: Table Of Contents
Summary Summary Compressive Limbs Therapy Machine body Graphic display detail Accessories Accessories size Specifications Technical Specifications Purpose Labelling Working instructions Troubleshooting Warnings Warranty Assistance Spare parts MDD 93/42/EEC Compliance Compressive Limbs Therapy... - Page 4 Compressive limbs therapy is able to promote a right venous circulation by decreasing muscle tension caused by stress or chronic and acute pains: thanks to its pump action it favorites venous return by increasing tissues blood circulation and finally their physiological renewal. Compressive limbs therapy can solve blood stagnation problem in damaged sanguine vessels or in body zones not correctly bedewed.
-
Page 5: Machine Body
Machine body ON/OFF Air discharge output Graphic display detail (1) MODE: mode selector (A1, A2, B, C, D1, D2, D3, D4, D5 ,D6) (2) SPEED: speed selector Speed 7 – 42 sec Speed 8 – 48 sec Speed 9 – 54 sec IACER SRL Page 5 di 22 MNPG80-01 of 06/05/2016... -
Page 6: Accessories
Speed 10 – 60 sec Speed 11 – 66 sec Speed 12 – 72 sec Speed 13 – 78 sec Speed 14 – 84 sec (3) TIMER UP/DOWN: time selector (from 0 to 99 minutes by step of 5) (4) PRESSURE: pressure selector ( from 0 to 240 mmHg by step of 1) (5) START/STOP: start/stop selector (6) LCD graphic display... -
Page 7: Accessories Size
Power Q-6000 Plus is equipped with: machine body double leggings (1) 2 derivations connection tubes for leggings (2) 2 pressure plantars (3) abdominal band (4) 1 derivation connection tubes for abdominal band (5) ... -
Page 8: Specifications
Max. width around 13 cm Min. width around 6 cm Specifications Power Q-6000 Plus has the following specifications: Class IIa equipment (Directive 93/42/EEC, annexed IX, rule Class I, applied part type BF (Classif. CEI EN 60601-1);... -
Page 9: Labelling
Labelling Warning Product subject to WEEE regulations concerning separate waste collection of electronic equipment Part applied BF Class II equipment Compliance with Directive 93/42/EEC and following modifications Manufacturing date (month/year) Attention, consult operating instructions Operating instructions IACER SRL Page 9 di 22 MNPG80-01 of 06/05/2016... -
Page 10: Working Instructions
Not protected against liquids entrance, keep dry Relative humidity Admission temperatures Don’t push the device Don’t sit on the device Don’t climb on top of the device Working instructions 1) Connect cable to the domestic plug 220-240 VAC, then turn ON the ON/OFF switch;... - Page 11 ii) Insert the pressure plantars under the feet; iii) When wearing the leggings pay attention to position the tubes connection cables in the internal side of each legging; iv) Connect 6 tubes to the 6 plugs positioned on each legging, paying attention to connect the longer tube to the higher position connector of legging (thigh): both the longer tube and the higher position connector have a darker color;...
- Page 12 iii) When using only a single output pay attention to close the free output with the air stopped jack (equipped with the body machine). c) Armband use Wear the armband and connect the tubes to the armband plugs, paying attention to connect the longer tube to the higher position connector on armband;...
- Page 13 N.B. Follow the same instructions in case of simultaneous use of armband and leggings. 3) Program selection (MODE selector on graphic display) a) Select the program by pressing on MODE button. There are 5 different programs: A1: Air flows in compression chambers till they reach pressure regime.
- Page 14 D(1-2-3-4-5-6): Air flows in compression chambers till they reach pressure regime. After that air flows only in the selected compression chamber (mode D1 chamber 1; mode D2 chamber 2; ….; mode D6 chamber 6). 4) Speed selection (SPEED selector on graphic display) a) Select airflow speed by pressing SPEED button.
-
Page 15: Troubleshooting
c) It’s not possible to change therapy time during the treatment. 6) Pressure selection (selector on the graphic display) a) Pressure can be adjusted from 0 to maximum pressure (240 mmHg ± 10%) by rotating the know in clockwise; b) Air start to flow in the compression chambers when it’s exceeded 10 mmHg;... -
Page 16: Warnings
Warnings The following warnings guarantee user safety and prevention against damages and/or lesions. Please read it carefully before using Power Q-6000 Plus. IACER SRL Page 16 di 22 MNPG80-01 of 06/05/2016... - Page 17 Do not use the device in presence of Please consult the doctor in case of acute inflammations or injuries. Infections cancer, intestinal problems, fractures, risk acute thrombosis other invalidating pathologies. Warning Do not use the device if you feel pain or Do not exceed 20 minutes in the first bad feelings treatments.
- Page 18 Use the device only with 220V power Do not press, bend or damage the supply. Electric shock risk. Disconnect electric cable. Electric shock risk. the device from domestic plug when not in use. Avoid to connect more devices to the Avoid device hits or drops.
- Page 19 Carriage precautions It doesn’t need any particular carriage precautions: however we recommend to put away Power Q-6000 Plus and its accessories in their own box after every treatment. IACER SRL Page 19 di 22...
-
Page 20: Warranty
Storage precautions Power Q-6000 PLUS is protected till following environmental conditions: Outside of the packaging temperature from +5 to + 40 °C humidity from 30 to 80% pressure from 500 to 1060 hPa Inside of the packaging from –10 to +55 °C... -
Page 21: Spare Parts
IACER Srl is the mandatary nominated by the manufacturer in the European Community with regard to Power Q-6000 Plus. Power Q-6000 Plus is an exclusive distribution of IACER SRL. Power Q-6000 Plus. All rights reserved. logos is owned by I.A.C.E.R. Srl and is registered.