Cross-Connect - ADTRAN SMART/RG SR400ac User Manual

Cross-Connect

On this page, you can configure bridge settings for traffic moving from a WAN-side VLAN to a LAN port. This can be used for bridged
IPTV or other services.
1. In the left menu, click
2. Click the Cross-Connect
3. Configure the tagging options:
a. In the Tag mode
DQTagged. The default is Tagged.
b. If Tagged or DQTagged is selected, the
values are 1 - 4079. The default is 5. Enter the P-bit type. Options are 0 - 7. The default is 0.
c. If DQTagged is selected, the
will be accepted and mapped to the specified WAN. Valid values are 1 - 4062. The default is 0.
4. Click the Apply button in the
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021
Network > Ethernet WAN. The Ethernet WAN page appears showing the
button. The following page appears.
field, select the type of tagging that should be performed. Options are Untagged, Tagged, and
VLAN
CVID field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs that
Pending changes... dialog box to save your settings.
and P-bit fields appear. Enter the ID of the appropriate VLAN. Valid
Internet settings.
23