DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
In the opened window, you can specify the following parameters:
Parameter
Enable rule
Action
MAC address
After specifying the needed parameters, click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
Move the switch to the right to enable the rule.
Move the switch to the left to disable the rule.
Select an action for the rule.
Deny: Blocks access to the Internet for the device with the
•
specified MAC address even if the default mode allows
access for all devices.
Allow: Allows access to the extender's network and to the
•
Internet for the device with the specified MAC address even
if the default mode denies access for all devices.
The MAC address of a device from the extender's LAN. You can
enter the MAC address of a device connected to the extender's LAN
at the moment. To do this, select the relevant device from the drop-
down list (the field will be filled in automatically).
). Also you can remove a rule in the editing window.
Page 99 of 125
Configuring via Web-based Interface
Description