Log - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Server
Figure 80. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
Local: the system log is stored in the extender's memory.
•
When this value is selected, the Server and Port fields are
not displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Remote and local: the system log is stored in the extender's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Page 110 of 125
Configuring via Web-based Interface
Description