System - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

System

In this menu you can do the following:
change the password used to access the extender's settings
•
restore the factory default settings
•
create a backup of the extender's configuration
•
restore the extender's configuration from a previously saved file
•
save the current settings to the non-volatile memory
•
reboot the extender
•
change the web-based interface language
•
update the firmware of the extender
•
configure automatic notification on new firmware version
•
enable/disable Wi-Fi connection and configure automatic reboot of the device on a schedule,
•
and set a schedule for different filter rules
view the system log; configure sending the system log to a remote host
•
check availability of a host on the Internet through the web-based interface of the extender
•
trace the route to a host
•
allow or forbid access to the extender via TELNET and SSH
•
configure automatic synchronization of the system time or manually configure the date and
•
time for the extender
enable the Auto Provision function.
•
Page 100 of 125
Configuring via Web-based Interface