Asus A8N-E User Manual page 86

3. When prompted, confirm the password by typing the exact characters
again, then press <Enter>. The password field setting is changed to
Set.
To clear the password:
1. Select the password field and press <Enter> twice. The following
message appears:
PASSWORD DISABLED !!!
Press any key to continue...
2. Press any key to continue. The password field setting is changed to
Clear.
A n o t e a b o u t p a s s w o r d s A n o t e a b o u t p a s s w o r d s A n o t e a b o u t p a s s w o r d s
A n o t e a b o u t p a s s w o r d s A n o t e a b o u t p a s s w o r d s
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
F o r g o t y o u r p a s s w o r d ? F o r g o t y o u r p a s s w o r d ?
F o r g o t y o u r p a s s w o r d ? F o r g o t y o u r p a s s w o r d ? F o r g o t y o u r p a s s w o r d ?
If you forget your password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you need
to erase the CMOS RAM, refer to section "2.6 Jumpers" for
instructions.
Password Check Password Check Password Check
Password Check Password Check
This field requires you to enter the password before entering the BIOS
setup or the system. Select [Setup] to require the password before
entering the BIOS Setup. Select [System] to require the password before
entering the system. Configuration options: [Setup] [System]
2 - 4 0 2 - 4 0
2 - 4 0 2 - 4 0 2 - 4 0
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p