Asus A8N-E User Manual page 113

2. Press <TAB> select the Striping
Block then press <Enter>. The
following submenu appears:
If you selected Striping or Stripe Mirroring, use the up or down arrow
keys to select the stripe size for your RAID 0 array then press
<Enter>.The available values range from 8 KB to 128 KB. The default
selection is 128 KB. The strip value should be chosen based on the
planned drive usage.
• 8 /16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
T I P : T I P : T I P : T I P : T I P : For server systems, use of a lower array block size is
recommended. For multimedia computer systems used mainly for audio
and video editing, a higher array block size is recommended for optimum
performance.
3.` Press <TAB> to select the Free Disks area. Use the left or right arrow
keys to assign the array disks.
4. Press <F7> to create RAID set. The following message box appears.
5. Press <Y> to clear the selected disks or <N> to proceed without
clearing the disks. The following screen appears.
Take caution in using this option. All data on the RAID drives will be lost!
A S U S A 8 N - E A S U S A 8 N - E A S U S A 8 N - E
A S U S A 8 N - E A S U S A 8 N - E
8K
16K
32K
64K
128K
Optim
Clear disk data?
[Y] YES [N]
3 - 2 5 3 - 2 5 3 - 2 5
3 - 2 5 3 - 2 5