Periodic Inspection - VeriFone P400 Installation Manual

Mounting P400 with
Mounting Plate to a
Vertical Bracket
CAUTION
Periodic
Inspection
NOTE
To mount the terminal with a mounting plate to a vertical bracket:
1
Ensure the mounting plate is attached to the terminal.
2
Align the three screw holes of the mounting plate with the vertical bracket
holes.
3
Screw the vertical bracket in place.
Mounting Considerations
Avoid having metallic objects in proximity to the contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat mounting plate.
An enclosed metal frame or mount may negatively affect CTLS performance.
Periodically inspect the terminal for possible tampering. Signs of tampering may
include:
•
Wires protruding from the device.
•
Foreign objects inserted into the smart card or mag stripe slot.
•
Signs of damage to the tamper-evident label.
•
Warning message on the device display.
If any device is found in tamper state, please remove it immediately from service.
Keep it available for potential forensic investigation, and notify your company
security officer and your local Verifone representative or service provider. For
more information on contacting Verifone, refer to

Periodic Inspection

Service and Support.
P400/P400 P I
LUS NSTALLATION
S
ETUP
27
G
UIDE