Hp X4000 Workstation Feature Set - HP x4000 Technical Reference Manual

HP x4000 Workstation Feature Set

The following table provides an overview of the x4000 Workstation
feature set.
Feature
System Board
Processor(s)
Chipset
Memory Controller
Hub (MCH)
Chapter 1
This manual downloaded from http://www.manualowl.com
Description
• Eight-layer extended ATX form-factor
• Single-sided
• Four power/ground layers
• Four signal layers
Intel dp Xeon processors:
• 1.5 GHz, 1.7 GHz, or higher with a quad-pumped 100MHz
Front side bus
• Netburst Microarchitecture with 20-stage instruction pipeline
Intel 860 chipset, including:
• Memory Controller Hub (MCH)
• Interface Controller Hub (ICH2)
• PCI 64-bit Hublink (P64H)
Provides the interface between the front side bus, memory, AGP,
hublink A, and hublink B. It supports:
• One or two Intel Xeon processor(s)
• Dual Rambus channels capable of supporting PC800 RIMMs
• AGP Pro 110 4X graphics with 1.5 V signaling
• 8-bit, 133 MB/s hublink A to ICH2, which bridges to the 33
MHz PCI bus
• 16-bit, 266 MB/s hublink B to P64H, which bridges to the 66
MHz PCI bus
System Overview
HP x4000 Workstation Feature Set
13