Asko D5233ADA Operating Instructions Manual page 22

Setting a signal
If you want the machine to signal when the wash is complete, you can program it to do this. The
machine is set without a signal by default.
1.
.
PROG PROG
.
START
.
STOP
or Reset
1.
.
PROG PROG
.
START
.
STOP

Switch off the dishwasher at the main switch.
Hold in the Delayed start button at the same time as you press the main
switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol lights, the signal is
activated.
Press the Start/Stop button and the setting will be stored until next time you
want to make a change.
Switch off the dishwasher with the main switch.
Hold in the Delayed start button at the same time as you press the main
switch. The button flashes. Release the button.
Press the Program button – when the Auto wash symbol goes out, the signal
is deactivated.
Press the Start/Stop button and the setting will be stored until next time you
want to make a change.
Customer Care Center
1-800-898-1879
www.askousa.com