Settings - Asko D5233ADA Operating Instructions Manual

Settings

Reprogramming
Some of the machine's functions can be reprogrammed. You get into the machine's change pro-
gram using the machine's ordinary buttons as per the instructions below. The selection will be retai-
ned until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all selec-
tions registered before the interruption of power will be retained.
Child-safe button lock
You can prevent a child starting the machine by accident or changing the settings by programming
the machine with a button lock, which requires the Temperature and Drying buttons to be pressed
simultaneously to start up the machine. The button lock will automatically be reactivated after three
minutes.
1.
+ .
PROG PROG
.
START
.
STOP
or Reset:
1.
+ .
.
PROG PROG
START
.
STOP
Switch off the dishwasher with the main switch.
Hold in the Temperature and Drying buttons while pressing the main
switch. The Temperature, Drying and start symbols will flash. Release
the Temperature and Drying buttons.
Press the Program button – when the Auto wash symbol is lit, the but-
ton lock has been activated
Then press the Start/Stop button to store the setting.
Switch off the dishwasher with the main switch.
Hold in the Temperature and Drying buttons at the same time as pres-
sing the main switch
Press the Program button – when the Auto wash symbol goes out, the
button lock has been deactivated
Then press the Start/Stop button to confirm the setting.
Customer Care Center
1-800-898-1879
www.askousa.com
1