New Holland 200 Series Service Manual page 49

5. Apply L ® 243™ to the threads of the rear mount-
OCTITE
ing bolts (3) for the engine.
6. Install the two rear mounting bolts (3) and bushings
for the engine. Torque the rear mounting bolt (3) to a
torque of 163 - 176 N·m (120 - 130 lb ft).
7. Apply L ® 243™ to the threads of the front
OCTITE
mounting bolts (2) for the engine.
8. Install the two front mounting bolts (2) and bushings for
the engine. Torque the front mounting bolts (2) to 163
- 176 N·m (120 - 130 lb ft).
9. Verify that the mounting bolts for the pump are secure,
and carefully remove support brace (4) and straps (5)
from pump.
10. Connect the lower heater hose (6) to the engine.
Engine - Engine and crankcase
47851950 14/05/2015
10.1 [10.001] / 17
4
931002047
5
931001933
6
931001929
7
931001940