Table of Contents
Advertisement
g.
PERC card
h.
IDSDM/M.2 BOSS card
i.
Mezzanine cards
j.
Mini Mezzanine card
k.
Internal USB key
CAUTION:
To prevent damage to the processor socket when replacing a faulty system board, ensure that
you cover the processor socket with the processor dust cover.
l.
Disconnect all the cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from the
system.
Steps
1. Using the Phillips #2 screwdriver, remove the screws that secure the Mezz card brackets to the system board.
2. Holding the brackets by the edges, lift the brackets out of the system.
3. Using the Phillips #2 screwdriver, remove the screws that secure the system board to the chassis.
4. Lift the system board out of the chassis.
Figure 88. Removing the system board
Next steps
1.
Replace the system
board.
Installing the system board
Prerequisites
NOTE:
Before replacing the system board, replace the old iDRAC MAC address label in the Information tag with the iDRAC
MAC address label of the replacement system board.
1. Follow the safety guidelines listed in the
92
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
