Fault Resolution; Cleaning The Pre-Filter; Cleaning The Fine Dust Filter Manually - Miele HS16 Operating Instructions Manual

Fault resolution


Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
Before carrying out any
troubleshooting, switch the appli-
ance off at the wall socket and un-
plug it.

Cleaning the pre-filter

The pre-filter is located at the rear of the
dust container.
This should be cleaned if it is obviously
dirty.
 Remove the dust container.
 Release the handle of the pre-filter
and remove the pre-filter.
 Rinse the pre-filter under cold running
water.

Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use washing-up liquid or any
pointed or sharp-edged objects to
clean the filter. Dry the pre-filter care-
fully after cleaning.
 Replace the dry pre-filter in the dust
container and lock the handle.
 Replace the dust container in the va-
cuum cleaner.

Cleaning the fine dust filter manually

Allow a drying time of 24 hours.
 Remove the dust container.
27