Connection
Attach the suction hose
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
To detach the suction hose
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
14
Connecting the suction hose to the
handle
Insert the suction hose into the
handle until it clicks into position.
Connecting the handle to the suction
tube
Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
To detach the handle from the suction
tube, press the release catch and pull
the handle out of the suction tube,
twisting it slightly as you do so.