Table of Contents
Advertisement
General information
1.1 Introduction
Caution
The ParaZero SafeAir M-200 Pro is smart-parachute system that deploys autonomously after
detecting a critical failure in your drone. The parachute slows the descent rate of your drone
and reduces the kinetic energy upon impact. The system incorporates the following main
components:
1
A unique patented ballistic parachute deployment system for near-zero-time
deployment, designed for operation at very low altitudes, even at zero speed.
2
A completely autonomous identification and activation capability, using its dedicated
SmartAir™ Pro Autonomous Trigger System.
3
A DJI M200 dedicated, independent flight termination system, called TerminateAir™. The
M200 TerminateAir™ controls the power supply of the drone for emergency shutdown.
The system is designed for fast assembly and detachment, using only four tool-free screws.
The SafeAir™ M-200 Pro drone safety system incorporates the following features:
1
Deployment in a fraction of a second.
2
Independent, autonomous detection of critical failures in an M200 drone, including XYZ
acceleration, critical angles and extreme maneuvers.
3
Weather detectors.
4
Effectiveness at low altitudes and zero speed.
5
Effectiveness at extreme roll angles and at maximum speed.
6
Audio and visual warnings.
7
Easy, user-friendly Installation.
8
Access data logs from black box via the desktop application.
SafeAir™ M-200 Pro Installation Guide
During all installation stages, be sure –
Not to connect the batteries to the drone.
Not to connect the TerminateAir to the SmartAir.
4
1
www.parazero.com
Advertisement
Table of Contents
