Table of Contents
Advertisement
5.2 Connecting the electronic TerminateAir
1
The electronic TerminateAir
should be first coupled with
the drone batteries before
installed
2
Slide the battery onto the
electronic TerminateAir, until it
is locked in place, indicated
by an audible click
3
Slide the coupled battery into
the drone until it is locked in
place, indicated by an
audible click. Repeat step 1
through 3 for the second
battery
4
Use the short black cable to
connect between the 2 upper
ports of the 2 electronic
TerminateAir units. Notice that
the white line on the
connector should face
upwards.
SafeAir™ M-200 Pro Installation Guide
10
www.parazero.com
Advertisement
Table of Contents
