Slot Load; Removing An Optical Disc; Tray Load - HP MC966LL/A Reference Manual

5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6. Close the disc tray.
NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.

Slot load

CAUTION:
the optical drive.
1. Turn on the computer.
2. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up.
3. Gently slide the disc into the slot load optical drive.

Removing an optical disc

Tray load

There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.
40 Chapter 6 Drives
Do not insert 8-cm optical discs into a slot load optical drive. It may cause damage to