Page 2
Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to Company under license. Microsoft and be bound by the terms of the HP End User Windows are U.S.
Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Table of contents 1 Welcome ................................1 Finding information ..........................2 2 Getting to know your computer ........................4 Top ............................... 4 TouchPad ..........................4 Lights ........................... 5 Buttons ..........................6 Keys ............................. 7 Front ..............................8 Right side ............................. 9 Left side ..............................
Page 6
Using the TouchPad ......................22 Turning the TouchPad off and on ..............23 Navigating ......................23 Selecting ......................24 Using TouchPad gestures ................. 24 Scrolling .................... 25 Pinching/Zooming ................25 Rotating .................... 26 6 Maintenance ..............................27 Inserting or removing the battery ......................28 Replacing or upgrading the hard drive ....................
Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Set up HP QuickWeb—Immediately access the Internet, widgets, and communication programs without launching your main operating system. For more information, refer to HP QuickWeb (select models only) on page ●...
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about ● Quick Setup poster How to set up the computer ● Help to identify computer components ● Getting Started Computer features ● To access this guide: How to connect to a wireless network ●...
Page 9
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd, Boise, ID 83714, USA ● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy ● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 Please include your product number, warranty period (found on your serial number label), name, and postal address.
Getting to know your computer ● ● Front ● Right side ● Left side ● Display ● Bottom TouchPad Component Description ● TouchPad light Amber: The TouchPad is off. ● Off: The TouchPad is on. TouchPad on/off button Turns the TouchPad on and off. Quickly double-tap the TouchPad on/off button to turn the TouchPad on and off.
Component Description TouchPad zone Moves the pointer and selects or activates items on the screen. Right TouchPad button Functions like the right button on an external mouse. Lights Component Description ● Power light White: The computer is on. ● Blinking white: The computer is in the Sleep state. ●...
Buttons Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Keys Component Description Displays system information when pressed in combination with the key. Displays system information when pressed in combination with the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Action keys Execute frequently used system functions.
Front Component Description Digital Media Slot Supports the following digital card formats: ● MultiMediaCard ● Secure Digital (SD) Memory Card Speakers (2) Produce sound. Chapter 2 Getting to know your computer...
Right side Component Description Optical drive (select models only) Reads and writes to an optical disc. ● Optical drive light (select models only) Green: The optical drive is being accessed. ● Off: The optical drive is idle. Optical drive eject button (select models Ejects the optical disc.
Left side Component Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Vents (2) Enable airflow to cool internal components.
Display Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). Internal microphones (2) Record sound. Webcam light On: The webcam is in use. Webcam Records video and captures still photographs. To use the webcam, select Start > All Programs > Communication and Chat >...
Bottom Component Description SIM slot (select models only) Supports a wireless subscriber identity module (SIM). The SIM slot is located inside the battery bay. Battery bay Holds the battery. Vents (4) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating.
Page 19
Component Description Memory module and wireless compartment Contains the memory module slots, the wireless LAN (WLAN) device, and the keyboard access screw. CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
HP QuickWeb (select models only) ● Starting HP QuickWeb The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite activities. Your computer is ready to go within seconds of starting QuickWeb, allowing you to rapidly access the Internet, widgets, and communication programs.
Starting HP QuickWeb ▲ To start HP QuickWeb, press the QuickWeb button when the computer is off or in Hibernation. The following table explains the different behaviors of the QuickWeb button. Button Behavior ● QuickWeb button (select models only) When the computer is off or in Hibernation, press the button to open HP QuickWeb.
Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ●...
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service.
Connecting to an existing WLAN Turn on the computer. Be sure that the WLAN device is on. Click the network icon in the notification area, at the far right of the taskbar. Select a network to connect to. Click Connect. If required, enter the security key.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network, select Start >...
Using the keyboard Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. The icons on the through keys represent the action key functions. To use an action key, press and hold this key to activate the assigned function. NOTE: The action key feature is enabled at the factory.
Increases speaker volume incrementally when you hold down this key. Mutes or restores speaker sound. Turns the wireless feature on or off. NOTE: This key does not establish a wireless connection. To establish a wireless connection, a wireless network must also be set up. Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external...
Turning the TouchPad off and on To turn the TouchPad off and on, quickly double-tap the TouchPad on/off button. NOTE: The TouchPad light is off when the TouchPad is on. The TouchPad light and onscreen display icons indicate the TouchPad status when the TouchPad is turned off or on.
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs.
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed.
Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock.
Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide. To insert the battery: ▲ Insert the battery (1) into the battery bay, and then pivot the battery (2) downward until it is seated.
Page 35
Remove the battery (3) from the computer. Inserting or removing the battery...
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button.
Page 37
Loosen the hard drive cover screw (1), and then remove the hard drive cover (2). Disconnect the hard drive cable (1), and then lift the hard drive (2) out of the hard drive bay. Replacing or upgrading the hard drive...
Installing a hard drive Insert the hard drive (1) into the hard drive bay, and then connect the hard drive cable (2). Align the tabs on the hard drive cover (1) with the notches on the computer, close the cover (2), and then tighten the hard drive cover screw (3).
Page 39
Align the tabs on the memory module compartment cover (1) with the notches on the computer, close the cover (2), and then tighten the memory module compartment cover screw (3). Replace the battery. Reconnect AC power and external devices to the computer. Turn on the computer.
Adding or replacing memory modules The computer has two memory module compartments. The capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
Page 41
If you are replacing a memory module, remove the existing memory module: Fold back the mylar shield (1), and then pull away the retention clips (2) on each side of the memory module. The memory module tilts up. Grasp the edge of the memory module (3), and then gently pull the memory module out of the memory module slot.
Page 42
Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place, and then fold over the mylar shield (4). CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module.
Page 43
Align the tabs on the memory module compartment cover (1) with the notches on the computer, close the cover (2), and then tighten the memory module compartment cover screw (3). Replace the battery. Reconnect AC power and external devices to the computer. Turn on the computer.
Backup and recovery ● Restore ● Creating restore media ● Performing a system restore ● Backing up and recovering your information Your computer includes tools provided by the operating system and HP to help you safeguard your information and restore it if ever needed. This chapter provides information on the following topics: ●...
Restore In the event of hard drive failure, to restore your system to its factory image you will need a set of recovery discs or a recovery flash drive that you can create using HP Recovery Manager. HP recommends that you use this software to create either a set of recovery discs or a recovery flash drive immediately after software setup.
To create a set of recovery discs or a recovery flash drive: Select Start > All Programs > Security and Protection > HP Recovery Manager > HP Recovery Media Creation. Follow the on-screen instructions. Performing a system restore HP Recovery Manager software allows you to repair or restore the computer to its original factory state.
Restoring using the restore media If possible, back up all personal files. Insert the first recovery disc into the optical drive on your computer or an optional external optical drive, and then restart the computer. – or – Insert the recovery flash drive into a USB port on your computer, and then restart the computer. NOTE: If the computer does not automatically restart in the HP Recovery Manager, the computer boot order needs to be changed.
You can back up your information to an optional external hard drive, a network drive, or discs. Back up your system at the following times: ● At regularly scheduled times TIP: Set reminders to back up your information periodically. ● Before the computer is repaired or restored ●...
Using Windows system restore points A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.
Customer support ● Contacting customer support ● Labels Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to...
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component Product name Serial number (s/n) Part number/Product number (p/n) Warranty period Model description Have this information available when you contact technical support.
Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S. Temperature Operating 5°C to 35°C 41°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Relative humidity (noncondensing) Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Maximum altitude (unpressurized) Operating -15 m to 3,048 m -50 ft to 10,000 ft...
Index Certificate of Authenticity label 45 ISP, using 17 AC adapter light 9 components action keys bottom 12 jacks decrease screen brightness display 11 audio-in (microphone) 9 front 8 audio-out (headphone) 9 Help and Support 21 left side 10 network 10 identifying 7 right side 9 RJ-45 (network) 10...
Page 56
memory module recovering from the dedicated webcam light, identifying 11 inserting 35 recovery partition 40 webcam, identifying 11 removing 35 recovering from the recovery Windows applications key, replacing 34 discs 41 identifying 7 memory module compartment, recovery discs 39 Windows logo key, identifying 7 identifying 13 recovery, system 40 wireless certification label 45...