Removing A Smart Card; Using A Usb Device; Connecting A Usb Device - HP MC966LL/A Reference Manual

Removing a smart card

▲ Grasp the edge of the smart card, and then pull it out of the smart card reader.

Using a USB device

Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.
Some USB devices may require additional support software, which is usually included with the
device. For more information about device-specific software, refer to the manufacturer's instructions.
These instructions may be provided with the software, on disc, or on the manufacturer's Web site.
The computer has at least 1 USB port that supports USB 1.0, 1.1, 2.0, or 3.0 devices. Your computer
may also have a powered USB port that provides power to an external device if it is used with a
powered USB cable. An optional docking device or USB hub provides additional USB ports that can
be used with the computer.

Connecting a USB device

CAUTION:
device.
▲ Connect the USB cable for the device to the USB port.
NOTE:
section.
You will hear a sound when the device has been detected.
To reduce the risk of damage to a USB connector, use minimal force to connect the
The USB port on your computer may look slightly different from the illustration in this
Using a USB device 31