Commissioning Tasks; Operation; Operating States - Beko BEKOMAT 13 Original Installation And Operation Manual

BEKOMAT ® 13, 13 CO, 13 CO PN25, 13 CO PN40

8.2 Commissioning tasks

Illustration
E
E

9. Operation

As soon as the BEKOMAT
®
components necessary for the proper functioning of the BEKOMAT
If the self-test is positive, the BEKOMAT
0 For acoustic signalling, the solenoid valve cycles twice.
If the self-test is negative, the BEKOMAT
0 For acoustic signalling, the solenoid valve cycles 20 times.
The LED signalling of the various operating states can be seen in the following table.

9.1 Operating states

Illustration
34 | 64
is supplied with voltage, a self-test starts automatically, during which all internal
goes into normal operation.
®
goes into fail-safe operation.
®
Original installation and operation manual
Description / explanation
1. Supply the BEKOMAT
®
2. Slowly charge the system section with pressure. To do
this, slowly open the shut-off valve [E].
are checked.
®
Description / explanation
Disconnected
• All LEDs are off
Switch on / power-on self-test
• All LEDs light up for 1 second
with voltage.