Beko BEKOMAT 13 Original Installation And Operation Manual page 28

BEKOMAT ® 13, 13 CO, 13 CO PN25, 13 CO PN40
Illustration
9
36
61
28 | 64
Description / explanation
2
5
6
7 I
10. Insert the power control board [9] back into the top
3
11. Fit the screw terminal [61].
2
Original installation and operation manual
cover [2] and fasten using the pan-head screw [36].
Tighten the voltage supply cable [I] while doing this
and screw the components of the cable gland [5, 6, 7]
in place.
Set the top cover [2] in place and fix it using the pan-
head screws [3].