Specifications - Apogee AD-1000 Operating Manual

Portable reference analog to digital conversion system
Table of Contents

Advertisement

QUANTIZATION
FREQUENCY RESPONSE
TOTAL HARMONIC DISTORTION
PLUS NOISE (THD+N)
Full Amplitude
–20dB scaled to Fs
SIGNAL TO NOISE RATIO
CROSSTALK
SOFT LIMIT THRESHOLD
METERING THRESHOLDS
COMMON MODE REJECTION
EXTERNAL SAMPLING RATE RANGE Any frequency from 32KHz to 54KHz via
INTERNAL SAMPLING RATE
SAMPLING RATE ACCURACY
SAMPLING RATE INDICATOR
INTERNAL CLOCK JITTER
NOMINAL DC POWER INPUT
INPUT VOLTAGE RANGE
INPUT DROPOUT VOLTAGE
LOW VOLTAGE INDICATOR
WEIGHT
DIMENSIONS
OPERATING TEMPERATURE
A
Analog In Left
XLR Female
*Word Clock, video; AES sync, S/PDIF sync; AES Audio, S/PDIF Audio. Both connectors tied together
(loop through) Unused connector should be terminated.
AD-1000 Operating Manual

Specifications

20 Bits/Sample
20Hz–10KHz ±0.025dB
10KHz–20KHz +0.025 / –0.1dB
Typically –100dB @ 48KHZ sampling; 0.5dB below full scale
Typically –103dB@ 48KHZ sampling; 0.5dB below full scale
Typically –104 Unweighted, –109dB A weighted
Typically better than –110dB @ 1kHz
–1.5dB below digital output full scale (adjustable) selectable on/off
Amber indicates 2dB below full scale
(includes peak hold function and SoftLimit Threshold)
Green indicates 12dB below full scale (adjustable)
(includes peak hold function)
Red indicates three overs in a row
(Includes peak hold function)
Typically better than 110dB@100Hz
Typically better than 75dB @10KHz
External Sync Input
32kHz, 44.056kHz, 44.1kHz, 44.144kHz,
47.952 kHz, 48kHz or 48.048kHz
± 10 PPM
Amber LEDs indicate output sampling rate
range for 32KHz, 44KHz, and 48KHz
Typically 30 picoseconds RMS
12vdc @ 1150-1300mA dependent upon function
+11.5 to +15 Volts DC (well regulated)
10.4 Volts DC
Power LED Flashes at <11.5vdc Power Input
1.3Kg (2 lbs 14 oz)
L=273.0 x W=141.2 x H=39.6 mm
(L=10.75 x W=5.56 x H=1.56 in)
0°C to 40°C (32°F to 104°F)
A
D
Analog In Right
AES/EBU Out
XLR Female
XLR Male
B
E
C
BNC Sync
In S/PDIF Out S/PDIF + ADAT
& Digital Ins*
TOSLink Optical
Page 14
15-pin HD connector:
Power (+12vdc)
Word Clock out
S/PDIF out
SDIF out
256 Fs out
F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents