Specifications - Apogee Mini-Me Owner's Manual

Inputs
Analog Inputs (two 3-pin/1/4 in TRS connectors on rear panel)
Line Level:
–10dBu (consumer) to +4dBu
Microphone Level:
Mic amp gain range 12-65 dB.
Instrument Level:
Instrument input impedance is 2.2MΩ.
Digital Input (USB connector on rear panel)
USB
USB Audio from computer available at resolutions up to 24-bit and sample rates up to 48 kHz.
Outputs
Analog Output
Headphones (1/8 in mini stereo headphone jack on rear panel):
0.3 Watts/Channel RMS out.
Digital Outputs
AES/EBU (male XLR on rear panel):
Sample rates from 44.1-96 kHz
Resolutions of 16, 20 and 24-bit.
(16 and 20 bit resolutions available only at 44.1 and 48 kHz sample rates)
Single-wire operation at 88.2 and 96 kHz
Digital black
S/PDIF (female coaxial connector on rear panel):
Sample rates from 44.1–96 kHz.
Resolutions of 16, 20 and 24-bit.
(16 and 20 bit resolutions available only at 44.1 and 48 kHz sample rates)
Single-wire operation at 88.2 and 96 kHz.
Digital black
USB Audio (USB connector on rear panel):
For use with a USB-capable computer
running a supported operating system and software application.
Sample rates up to 48 kHz.
Resolutions up to 24-bit.
Dynamic range
THD+Noise
Sample rates
Freq. Response
Inputs
Mic/line (XLR), instrument (TRS) (universal skts)
Min/Maximum input level (CAL/LINE)
Mic amp gain range
Mic input impedance
Line input impedance
Instrument input impedance (1/4in connector) 2.2MΩ
Digital interfaces
Headphone monitor
Power input 6-16 v dc, 5.5W
Power supply
USB power
Size (w x d x h)
Weight
Mini•Me User's Guide

Specifications

105 dB
–94 dB
44.1–96 kHz ±10%
20 Hz – 20 kHz ±0.2 dB @ 44.1 kHz Fs
–6/28 dBu
12–65 dB
1.2 kΩ
10 kΩ
USB Audio I/O, AES/EBU, S/PDIF
0.3W/channel RMS out, 1/8in jack
External, universal voltage in, 12v dc out
Derived from interface
5.4in x 9.8in x 1.5in
2 lb
Page 26