Outputs - Apogee AD-1000 Operating Manual

S/PDIF DIGITAL OPTICAL INPUT (Optical input connector on rear panel)
32kHz to 54kHz Input Sampling Rates.
S/PDIF.
ADAT DIGITAL OPTICAL INPUT – available only with special option AD1K-PRT

OUTPUTS

D. AES OUTPUT (Male XLR connector on rear panel)
32kHz to 54kHz Output Sampling Rate.
AES/EBU Format when front panel NORM position selected.
Audio Black when front panel ADAT position selected.
E. S/PDIF OUTPUT (15 Pin HD connector on rear panel)
32kHz to 54kHz Output Sampling Rate.
S/PDIF Format when front panel NORM position selected.
Audio Black when front panel ADAT position is selected.
F. OPTICAL OUTPUT (Toslink Optical output connector on rear panel)
32kHz to 54kHz Output Sampling Rate.
S/PDIF or ADAT Format selectable on front panel power switch.
E. WORD SYNC OUTPUT (15 Pin HD connector on rear panel)
32kHz to 54kHz Output Sampling Rate.
Two types available:
• Balanced – RS422 Compatible.
• Unbalanced – TTL/Sony Compatible.
F. 256 fs OUTPUT (15 Pin HD sub connector on rear panel)
OPTIONAL DIGITAL OUTPUTS
E. SDIF-II OUTPUT (15 Pin HD connector on rear panel)
32kHz to 54kHz Output Sampling Rate.
Balanced - RS422 Compatible or Unbalanced - TTL Compatible.
F. HI-RESOLUTION OPTION - AD1K-PRT (20 bit encoding and decoding across track pairs)
Through a combination of enhancements to the AD-1000, a hi-resolution stereo output can be
mapped to stereo pairs of ADAT (or TDIF with the FC-8 format converter) format tracks.
This process is compatible with Rane's Paqrat™ format. Additional information can be found
in the Options and Enhancements section (page 35).
AD-1000 Operating Manual
Page 16