Siemens MPP 464 IE H Equipment Manual page 72

Spare parts/accessories
10.2 Display elements and operator controls
Function Upper section
actuator / accessories
Spot LED
Keyswitch Safety lock cylinder 28 mm
Actuating angle 90° ∅
2 positions *) RXJSSA 15 E
Key can be removed in
both positions
Keys / position se‐ RX-JUWEL 22.3 mm
lector Schlegel catalog
*) Safety-relevant
Note
When assigning the colors for keys and signaling lights to the corresponding functionality,
observe the standard EN 60204 Part 1 or VDE 0113 Part 1, Chapter Pushbuttons/colors.
Name Description
Override spindle / Electronic rotary switch
rapid traverse 1x16G, T=24, cap, button,
pointer, dials spindle and rap‐
id traverse
Override feedrate / Electronic rotary switch
rapid traverse 1x23G, T=32, cap, button,
pointer, feed and rapid-tra‐
verse dials
Override feedrate / Electronic rotary switch
rapid traverse 1) 1x29G, T=32, cap, button,
pointer, feed dials and rapid
traverse
22 mm actuating element,
40 mm mushroom pushbut‐
Emergency stop
ton, snap action with tamper
protection, latching, red,
with holder, non-illuminated
Contact block 2 NC, exten‐
sion NC EMERGENCY STOP
Commanding and All extension elements
signaling devices
EKS identification sys‐ Serial interface
tem Euchner
Interface
PROFIBUS DP
72
Lower section
contact block / indicator light
L5.5K28UW (white)
Contact block AT2
Contact block AT2
Quantity Article number
1
1
1
1 3SU1000-1HB20-0AA0 *)
1 3SU1400-1AA10-1CA0 *)
Schlegel or 3SU1 following selection
from Low-Voltage Controls and Distribu‐
tion Catalog (LV 1)
EKS-A-ISX-G01-ST09/03
EKS-A-IDX-G01-ST09/03
Installa‐ Use
tion loca‐
tion
S1 ... S4
S7 ... S10
S1 ... S4 For S1 1 NC internal, 2 NO +
S7 ... S10 1 NC external
For S2 ... S4, S7 ... S10 1 NC
internal, 1 NO + 1 NC exter‐
nal
S1 ... S4
S7 ... S10
6FC5247-0AF12-1AA0
6FC5247-0AF13-1AA0
6FC5247-0AF14-1AA0
Machine Pushbutton Panel: MPP 464 IE H
Equipment Manual, 03/2021, A5E50810237B AA
Installation
location
BP12
1)
BP13
BP12
1)
BP01
BP01
BP20 ... BP23
BP17