York Hx 3 S1-THXU280 User's Information Manual page 30

5407935-UUM-E-1020
Select mode
• Tap the mode button for mode options (set to Auto in Figure 37).
The Select mode screen will appear with equipment-specific
modes: Auto, Heat, Cool, and Off. See Figure 38.
• Tap Advanced modes to select Max Heat, Max Cool and Emer-
gency heat. See Figure 39. (Some modes are equipment-specific
and may not be available.)
• Away mode can be enabled or disabled by selecting the toggle
button. When enabled, Away will be visible on the App Home
Screen mode button. (See Settings to edit Away mode.)
• To exit without changes, tap the (X) icon in the upper right of the
screen.
Figure 38: Select mode
Select fan options
• Tap the fan button for options: Auto, Run always, Run 15 min/h,
Run 30 min/h, or Run 45 min/h. If the system is communicating
any option other than Auto, Airflow percentage adjustments are
possible.
Navigate the app bottom bar
The app bottom bar allows the user to always have access to three key
items in the app (see Figure 37):
• Home: Navigates the user back to the App Home Screen.
• Schedules: Opens the Schedules screen (see Schedules section
on page 31).
• Settings: Opens the Settings screen (see Settings section on
page 33).
30
A1418-001
Figure 39: Advanced modes
Johnson Controls Ducted Systems
A1419-001