WORKSHOP MANUAL
4.2.1 Preliminary procedures
It is only necessary to remove the fuel tank when replacing it, and to do so requires the removal of
certain elements of the unit beforehand.
1. Unscrew the tank cap (1), disconnect the cap (1) clip (2) and fasten the wire (3) to the nozzle
(4) to prevent it falling inside.
2. Remove the left cover of the chassis (5) fixed
by:
• two screws (6) accessible from the front low-
er section;
• one screw (7) fixing the rear section in place;
ZT 5132 T
1
3
4
Chapter
4 - ENGINE AND FUEL TANK
4.2 TANK
2
1
6
5
5
7
EDITION
PAGE
2017
17 /
58
2
6