BT BT2500 Quick Setup And User Manual page 70

70
't access your messages from another phone
Have you changed the remote access PIN? See page 47.
Always keep a note of the new PIN in a safe place.
• Has Remote access been turned off? To turn remote access on, see page 48.
Have you subscribed to a Caller Display service from your network provider?
See page 60.
• The caller may have withheld their number.
• Network may not have the callers number information.
• An exact name/number match was not found in your contacts. Check that you've
stored the full STD dialling code.
't register a handset to a base
You can register up to five handsets to your BT2500 base and you can register
your BT2500 handset to up to four bases. Check that you've not exceeded the
limits.
• Check that you've entered the correct system PIN number (default PIN 0000).
• Check that you're at least one metre away from other electrical equipment to
avoid interference when registering.
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp