BT BT2500 Quick Setup And User Manual page 54

54 ngs
e are 5 base ringer volume
levels plus Ringer Off. The
default setting is Level 3.
If you're connected to a
switchboard, you might
need to enter an access code
(e.g.9) before each number
is dialled. Your BT2500 can
store an access code which is
automatically dialled before
each number.
If you wish to revert to not
using a PBX access code, you
need to go into the PBX code
menu and delete all the digits
by selecting , then press
Del.
the base ringer volume
Select Menu, scroll
2. Sounds is displayed, press
is displayed and press
3. Ringing is displayed, press
display Ringing Volume, then press
4. The current base ringtone will play at the current
volume. Use the
decrease the volume, or turn the ringer off. You will
see the volume level change on the display or Ringer
Off will be displayed if you turn the ringer off.
5. Press
displayed and you will hear a confirmation tone.
a PBX access code
Select Menu, scroll
2. Sounds is displayed, press
displayed and press
3. Press PBX Code and press
4. Enter the number you want (maximum of 4 digits)
and press
and you will hear a confirmation tone.
0800 145 6789* or go to www.bt.com/producthelp
Settings and press
Base Settings
Saved will be
Settings and press
Base Settings is
Saved will be displayed