BT BT2500 Quick Setup And User Manual page 41

the answer delay
Select Menu, Answer Phone is displayed, press
2. Press Answer Settings is displayed,
press
3. Press
Answer only and press
4. Answer delay is displayed, press
5. Press
want (0-9 rings or Time saver) and press
Saved will be displayed.
the maximum message length
machine message can be: 1 minute, 2 minutes
or 3 minutes. The default setting is 3 minutes.
1. Select Menu, Answer Phone is displayed, press
2. Press Answer Settings is displayed,
press
3. Answer and record is displayed, press
4. Press Maximum message length and
press
5. Press
press Saved will be displayed.
how many times the phone will
ring before the answer machine
takes the call. You can choose
from 0-9 rings or Time saver.
The default setting is 4 rings.
Answer and record or
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after 10
seconds. If you don't have new
messages it will answer after
20 seconds. This means you
can hang up knowing that you
have no new messages, saving
you the time and the cost of
the call.
(or another voicemail service)
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
delay should be less than on
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
0800 145 6789* or go to www.bt.com/producthelp
ver
ibility with BT 1571
e sure the answer delay is
41