BT BT2500 Quick Setup And User Manual page 20

20
o answer
o answer is set to On you
can answer a call by lifting the
handset off the base.
If auto answer is set to Off,
you'll need to lift the handset
off the base and press
Auto answer On is the default
setting. See page 53.
aiting
service on or off, see page 62.
ange warning
s out of
range of the base, the display
will show Searching for base...,
the backlight will turn up to
100% to indicate the alert
message and you will hear a
warning tone. You need to
move back within range of the
base station.
If you move out of range when
you're on a call, you'll lose your
connection. The handset will
automatically re-connect to
the base when you move back
within range.
display shows Incoming call and
caller display service, the display shows the caller's
number if it's available or the caller's name if it
matches an entry stored in your contacts list.
1. Press
Waiting
on, your phone will alert you to a second incoming
call if you're already engaged on an external call.
1. You'll hear the call waiting tone and if you also
have caller display the display will show the number
of the caller, or the name if it matches an entry in
your contacts.
2. Press Switch by pressing
answer the new call and your first caller is put on hold.
3. Press Switch by pressing
toggle between the two callers.
4. Press
5. If you hang up a current call, your phone will ring
back to reconnect you to your original call if that
caller is still connected.
0800 145 6789* or go to www.bt.com/producthelp